Danfoss PVG 32

‒
LS pressure limiting valves individually adjustable for ports A and B
‒
Different interchangeable spool variants
‒
All versions suitable for mechanical, hydraulic and electrical actuation
Actuation modules
The basic module is always fitted with mechanical actuator PVM and PVMD, which can be combined with
the following as required:
•
Electrical actuator (11 - 32 V ===):
‒
PVES – proportional, Super
‒
PVEH – proportional, High performance
‒
PVEH-F – proportional high performance, Float
‒
PVEA – proportional low hysteresis
‒
PVEM – proportional, Medium performance
‒
PVEO – ON/OFF
‒
PVEH-U/PVES-U – proportional, voltage control, 0-10 V
‒
PVED-CC – Digital CAN controlled J1939/ISOBUS
‒
PVED-CX – Digital CAN controlled CANopen X-tra safety
‒
PVEP – PWM voltage controlled (11-32 V)
‒
PVHC – High Current actuator for PVG
•
PVMR, cover for Mechanical detent
•
PVMF, cover for Mechanical Float
•
PVH, cover for Hydraulic actuation
Remote control units
•
Electrical remote control units:
‒
PVRE, PVRET
‒
PVREL
‒
PVRES
‒
Prof 1
‒
Prof 1 CIP
‒
JS120
‒
JS1000 Ball grip
‒
JS1000 PRO grip
‒
JS2000
‒
JS6000
‒
JS7000
•
Hydraulic remote control unit: PVRHH
Technical Information
PVG 32 Proportional Valve Group
General description
6 |
©
Danfoss | August 2017 520L0344 | BC00000038en-US0802