Need help?Do you have a question about the Danfoss PVG 256 and is the answer not in the manual?
General| Type | Proportional Valve |
|---|---|
| Max Operating Pressure | 350 bar |
| Temperature Range | -20°C to +80°C |
| Valve Sections | Up to 6 sections |
| Viscosity Range | 10 to 400 mm²/s |
| Filtration | 25 µm |
| Control Type | Proportional |
| Voltage Supply | 12/24 V DC |
| Housing Material | Aluminium |
| Seals | NBR |
Discusses general safety considerations for control valves and system failures.
Provides sectional views of PVG 16/32 and 128/256 valve types for servicing.
Illustrates electrical components and connections of the control system.
Details the installation process, including assembly and component identification.
Shows plug/port orientation and dimensions for PVG 16 assemblies.
Illustrates PVP pump side module and max flow setting for PVG 16/32.
Explains pressure setting, rated pressure, and torque for PVG 16 components.
Covers installation and technical data for PVG 16 PVE actuators.
Details the installation process for PVG 32 valve assemblies and components.
Shows plug/port orientation and dimensions for PVG 32 assemblies.
Explains pressure setting, rated pressure, and torque for PVG 32 components.
Details installation and specifications for PVG 32 PVE series 4 actuators.
Details the installation process for PVG 128/256 valve assemblies.
Shows installation and plug orientation for PVG 128/256 assemblies.
Illustrates the pump side module and max flow setting for PVG 128/256.
Details PVE series 7 installation for PVG 128/256 actuators.
Lists and defines acronyms and PVG 16 service parts including modules and kits.
Lists service parts for PVG 32, covering modules, kits, and exploded views.
Lists service parts for PVG 128/256, covering modules, kits, and exploded views.
To Next Page
