Danfoss PVG 256

PVG 32 plug orientation
The PVG 32 series has increasing L port sizes with higher PVB numbers.
In particularly exposed applications, protection in the form
of screening of the electrical actuator is recommended
*85[3.3]
*170[6.7]
*170[6.7
]
*85[3.3]
PVP/PVSI:
Max. 40 Nm
[354 lbf•in]
PVS:
Max. 20 Nm
[177 lbf•in]
Number of PVB 32 1 2 3 4 5 6 7 8 9 10 11 12
L1 mm 82 130 178 226 274 322 370 418 466 514 562 610
[in] [3.23] [5.12] [7.01] [8.90] [10.79] [12.68] [14.57] [16.46] [18.35] [20.24] [22.13] [24.02]
L2 mm 141 190 238 287 335 384 432 481 529 578 626 675
[in] [5.55] [7.48] [9.37] [11.30] [13.19] [15.12] [17.01] [18.94] [20.83] [22.76] [24.65] [26.57]
Service and Parts Manual
PVG 16/32/128/256
Installation
©
Danfoss | October 2018 AX284661889190en-000101 | 25