Danfoss PVG 256

PVED-CC series 5 for PVG 32
Assembling the PVE requires close attention and completion of the information below.
PVED-CC series 5 installation
V310 452.A
V310452.A
Be sure to protect LVDT pin and O-rings are in place. Do not over torque.
PVED-CC series 5 for PVG 32 pin layout
2x4 AMP
1
2
3
4
2x4 DEUTSCH
3
4
1
2
3
4
1
2
Pin layout for PVEP
Type Connector Pin 1 Pin 2 Pin 3 Pin 4
PVEP 2x4 AMP CAN-L Vbat+ GND CAN-H
2x4 DEUTSCH CAN-H CAN-L Vbat+ GND
All pins are internally connected.
1
Internally connected
Service and Parts Manual
PVG 16/32/128/256
Installation
32 |
©
Danfoss | October 2018 AX284661889190en-000101