Danfoss VLT AQUA Drive Series - Motor Cable Connection

Illustration 5.15: How to connect to mains and earthing with disconnector (A5 enclosure).
5.3.4 Motor Cable Connection
NB!
Motor cable must be screened/armoured. If an unscreened / unarmoured cable is used, some EMC requirements are not complied
with. For more information, see
EMC specifications .
Illustration 5.16: Mounting of decoupling plate.
VLT
®
AQUA Drive Design Guide 5 How to Install
MG.20.N5.02 - VLT
®
is a registered Danfoss trademark 123
5