Danfoss VLT AQUA Drive Series - Page 132

5.3.11 Basic Wiring Example
1. Mount terminals from the accessory bag to the front of the fre-
quency converter.
2. Connect terminals 18 and 27 to +24 V (terminal 12/13)
Default settings:
18 = Start
27 = stop inverse
Illustration 5.21: Terminal 37 available with Safe Stop Func-
tion only!
5 How to Install VLT
®
AQUA Drive Design Guide
132 MG.20.N5.02 - VLT
®
is a registered Danfoss trademark
5