Danfoss VLT AQUA Drive Series User Manual

The maximum output current.
I
VLT,N
The rated output current supplied by the frequency converter.
U
VLT, MAX
The maximum output voltage.
Input:
Control command
You can start and stop the connected motor by means of
LCP and the digital inputs.
Functions are divided into two groups.
Functions in group 1 have higher priority than functions in
group 2.
Group 1
Reset, Coasting stop, Reset and Coasting stop, Quick-
stop, DC braking, Stop and the "Off" key.
Group 2
Start, Pulse start, Reversing, Start reversing, Jog and
Freeze output
Motor:
f
JOG
The motor frequency when the jog function is activated (via digital terminals).
f
M
The motor frequency.
f
MAX
The maximum motor frequency.
f
MIN
The minimum motor frequency.
f
M,N
The rated motor frequency (nameplate data).
I
M
The motor current.
I
M,N
The rated motor current (nameplate data).
n
M,N
The rated motor speed (nameplate data).
P
M,N
The rated motor power (nameplate data).
T
M,N
The rated torque (motor).
U
M
The instantaneous motor voltage.
U
M,N
The rated motor voltage (nameplate data).
VLT
®
AQUA Drive Design Guide 1 How to Read this Design Guide
MG.20.N5.02 - VLT
®
is a registered Danfoss trademark 7
1

Danfoss VLT AQUA Drive Series Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive Series
Category	Media Converter
Language	English