Figure 3.19 Control Card Wiring Path for Frame Size D13
Figure 3.20 Control Card Wiring Path for Frame Size E9
1
Routing path for the control card wiring, inside the adjustable
frequency drive enclosure.
Figure 3.21 Control Card Wiring Path for Frame Size F18
3.4.18
Access to Control Terminals
All terminals to the control cables are located beneath the
LCP (both filter and adjustable frequency drive LCP). They
are accessed by opening the door of the unit.
Installation Instruction Manual
32 Danfoss A/S © Rev. 2014-02-07 All rights reserved. MG37A222
33
To Next Page
Loading...
