Danfoss VLT AutomationDrive FC 302

Par.
No. #
Parameter description Default value 4-set-up FC
302
only
Change during
operation
Conver-
sion
index
Type
5-95 Pulse Out #29 Bus Control 0 % All set-ups x TRUE -2 N2
5-96 Pulse Out #29 Timeout Preset 0 % 1 set-up x TRUE -2 Uint16
5-97 Pulse Out #X30/6 Bus Control 0 % All set-ups TRUE -2 N2
5-98 Pulse Out #X30/6 Timeout Preset 0 % 1 set-up TRUE -2 Uint16
Programming Instruction Manual
88 Danfoss A/S © Rev. 2014-02-07 All rights reserved. MG37A222
66