Danfoss VLT AutomationDrive FC 302 Design Guide

FC 300 Design Guide
How to Read this Design Guide
Input
C
ontrol command:
You can start and stop the connected motor by
means of LCP and the digital inputs.
Functions are divided into two groups.
Functions in group 1 have higher priority
than functions in group 2.
Group 1 Reset, Coasting stop, Reset and
Coasting stop, Quick-stop, DC
braking, Stop and the "Off" key.
Group 2 Start, Pulse start, Reversing,
Start reversing, Jog and Freeze
output
Motor:
f
JOG
The m otor frequency when the jog function is activated (via digital terminals).
f
M
The motor frequency.
f
MAX
The maximum m otor frequency.
f
MIN
The minimum motor frequency.
f
M,N
The rated motor frequency (nam ep late data).
I
M
The motor current.
I
M,N
The rated motor current (nameplate data).
M
-TYPE
Size and type of the connected motor (dependencies).
n
M,N
The rated motor speed (nam eplate data).
P
M,N
The rated motor power (nam ep late data).
T
M,N
The rated torque (motor).
U
M
The instantaneous motor voltage.
U
M,N
The rated motor voltage (nameplate data).
9
MG.33.B3.22 - VLT is a registered Danfoss trademark

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English