14-90 Fault Level
Option: Function:
[0] * Off Use this parameter to customize Fault levels. Use
[0] Off with caution as it will ignore all Warnings
& Alarms for the chosen source.
14-90 Fault Level
Option: Function:
[1] Warning
[2] Trip
[3] Trip Lock
Failure Alarm Off Warning Trip Trip Lock
Over Current 13 D X
Motor phase missing 30 D X
Motor phase missing 31 D X
Motor phase missing 32 D X
Table 6.11 Table for Selection of Choice of Action when Selected Alarm Appears
D = Default setting. x = possible selection.
1) Only high power drives
In FC small and medium A69 is only a warning
Parameter Descriptions
Operating Instructions VLT
®
CDS302 and CDS303
MG34M302 - VLT
®
is a registered Danfoss trademark/Commercial Compressor 99
6
6
To Next Page
Loading...
