Danfoss VLT Compact Starter MCD 201 User Manual

7.2.2.2 Control Word (Write-only) 13
7.2.2.3 Command Examples 14
7.2.3 Status Information 14
7.2.3.1 Reading Status Information from the Soft Starter 14
7.2.3.2 Status Word (Read-only) 15
7.2.3.3 Trip Codes 16
7.3 Acyclic Operation
17
7.3.1 Class 0X01 Identity Object 17
7.3.2 Vendor-specic Objects 17
7.3.2.1 Class 100 Objects (Read/Write) 17
7.3.2.2 Class 101 Objects (Read/Write) 18
7.3.2.3 Class 103 Objects (Read-only) 18
7.3.2.4 Class 104 Objects (Read-only) 19
7.3.3 Supported Services for Vendor-specic Objects 19
7.3.3.1 Set Attribute Single 19
7.3.3.2 Get Attribute Single 20
7.3.3.3 Status Codes for Acyclic Services 21
8 Network Design
22
8.1 Star Topology
22
8.2 Line Topology
22
8.3 Ring Topology
22
8.4 Combined Topologies
23
9 Specications
24
Index
25
Contents EtherNet/IP Module
2 Danfoss A/S © 05/2017 All rights reserved. MG17Q102

Danfoss VLT Compact Starter MCD 201 Specifications

General

Brand	Danfoss
Model	VLT Compact Starter MCD 201
Category	Controller
Language	English