Danfoss VLT FC Series Operating Guide

•
•
•
•
•
Product
Type code
VLT® Refrigeration Drive FC 103
T at digit 18 of the type code.
VLT® AQUA Drive FC 202
T or U at digit 18 of the type code.
VLT® AutomationDrive FC 301, enclosure size A1
T at digit 18 of the type code.
VLT® AutomationDrive FC 302
X, B, or R at digit 18 of the type code.
VLT® Decentral Drive FCD 302
X, B, or R at digit 18 of the type code.
VLT® Parallel Drive Modules
T or U at digit 18 of the type code.
1.4 Applied Standards and Compliance
Using the STO on terminal 37 requires that the user fulfills all provisions for safety, including relevant laws, regulations, and guide-
lines.
The integrated STO function complies with the following standards:
IEC/EN 60204-1: 2016 Stop category 0 - uncontrolled stop.
IEC/EN 61508: 2010 SIL2.
IEC/EN 61800-5-2: 2016.
IEC/EN 62601: 2015 SIL CL2.
EN ISO 13849-1: 2015 Category 3 PL d.
AQ313340186453en-00101 / 130R05446 | Danfoss A/S © 2021.03
Introduction
Safe Torque Off
Operating Guide

Danfoss VLT FC Series Specifications

General

Category	DC Drives
Series	VLT FC Series
Output Voltage	0-100% of input voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Overtemperature, Motor overload
Communication Interfaces	CANopen, PROFIBUS, Ethernet
Cooling Method	liquid-cooled
Enclosure Rating	IP20, IP21, IP55
Ambient Temperature	-10°C to +40°C (14°F to 104°F) without derating