Danfoss VLT HVAC Basic Drive FC 101 Programming Guide

Parameter Range Default Usage
Parameter 0-03 Regional
Settings
[0] International
[1] US
[0] International –
Parameter 0-06 GridType [0]–[132] see Table 2.4. Size selected Select the operating mode for restart after reconnection of
the frequency converter to mains voltage after power-
down.
Parameter 1-00 Conguration
Mode
[0] Open loop
[3] Closed loop
[0] Open loop Select [3] Closed loop.
Programming Programming Guide
MG18B502 Danfoss A/S © 04/2018 All rights reserved. 17
2 2

Danfoss VLT HVAC Basic Drive FC 101 Specifications

General

Brand	Danfoss
Model	VLT HVAC Basic Drive FC 101
Category	DC Drives
Language	English