Danfoss VLT Micro Drive FC 51 Series Programming Guide

4.12.4. 15-3* Fault Log
This parameter group contains a fault log showing reasons for the ten latest trips.
15-30 Fault Log: Error Code
Range: Function:
0 [0 - 255] View error code and look it up in VLT Micro Operating Instructions.
4.12.5. Drive Identification, 15-4*
Parameters containing read only information about the hardware and software configuration of the frequency converter.
15-40 FC Type
Option: Function:
View FC type.
15-41 Power Section
Option: Function:
View power section of frequency converter.
15-42 Voltage
Option: Function:
View voltage of frequency converter.
15-43 Software Version
Option: Function:
View software version of frequency converter.
15-46 Frequency Converter Ordering No
Option: Function:
View ordering number for re-ordering frequency converter in its original configuration.
15-48 LCP ID No
Option: Function:
View LCP ID number.
15-51 Frequency Converter Serial Number
Option: Function:
View frequency converter serial number.
4. Parameter Descriptions VLT
p
Micro Drive FC 51
58 MG.02.C4.02 - VLT
p
is a registered Danfoss trademark
4

Danfoss VLT Micro Drive FC 51 Series Specifications

General

Brand	Danfoss
Model	VLT Micro Drive FC 51 Series
Category	Media Converter
Language	English