Danfoss VLT Micro Drive FC 51 Series - Operation;Display

Parameter Number Parameter Description Default Value 2 Setup Change During Operation Conversion Index Type 0 - 03 Regional Settings [0] International 1 set-up FALSE - Uint8
0 - 04 Operating State at Power-up (Hand)
[1] Forced stop ref=old All set-ups TRUE
- Uint8
0 - 10 Active Set-up [1] Set-up 1 1 set-up TRUE - Uint8
0 - 11 Edit Set-up
[1] Set-up 1 1 set-up TRUE
- Uint8
0 - 12 Link Setups [20] Linked All set-ups FALSE - Uint8
0 - 40 [Hand on] Key on LCP
[1] Enabled All set-ups TRUE
- Uint8
0 - 41 [Off / Reset] Key on LCP [1] Enable All All set-ups TRUE - Uint8
0 - 42 [Auto on] Key on LCP
[1] Enabled All set-ups TRUE
- Uint8
0 - 50 LCP Copy [0] No copy 1 set-up FALSE - Uint8
0 - 51 Set-up Copy
[0] No copy 1 set-up FALSE
- Uint8
0 - 60 Main Menu Password 0 1 set-up TRUE 0 Uint16
5.2.5. 0-** Operation/Display
5. Parameter Lists VLT
p
Micro Drive FC 51
68 MG.02.C4.02 - VLT
p
is a registered Danfoss trademark
5