Danfoss VLT Micro Drive FC 51 Series - Controllers

Parameter Number Parameter Description Default Value 2 Setup Change During Operation Conversion Index Type 7 - 20 Process CL Feedback 1 Resource [0] No function All set-ups TRUE - Uint8
7 - 30 Process PI Normal/ Inverse Control
[0] Normal All set-ups TRUE
- Uint8
7 - 31 Process PI Anti Windup [1] Enabled All set-ups TRUE - Uint8
7 - 32 Process PI Start Speed
0 Hz All set-ups TRUE
-1 Uint16
7 - 33 Process PI Proportional Gain 0.01 All set-ups TRUE -2 Uint16
7 - 34 Process PI Integral Time
9999 s All set-ups TRUE
-2 Uint32
7 - 38 Process PI Feed Forward Factor 0% All set-ups TRUE 0 Uint16
7 - 39 On Reference Bandwidth
5% All set-ups TRUE
0 Uint8
5.2.12. 7-** Controllers
VLT
p
Micro Drive FC 51 5. Parameter Lists
MG.02.C4.02 - VLT
p
is a registered Danfoss trademark 75
5