EasyManua.ls Logo

Danfoss WP75- RF - Preset Programmes; Before You Start

Danfoss WP75- RF
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Weekdays (Mon-Fri) Weekend (Sat-Sun)
Event Time Temp °C Event Time Temp °C
1 06:30 55.0 1 07:30 55.0
2 08:30 OFF 2 09:30 OFF
3 12:30 45.0 3 11:30 45.0
4 13:30 OFF 4 13:30 OFF
5 16:00 55.0 5 16:30 55.0
6 22:00 OFF 6 22:30 OFF
Preset Programmes
Your WP75-RF comes ready programmed with a set of operating
times and temperatures which often suit most people.
Please note: In order to reduce the risk of Legionella infection, it is
recommended that water temperature be set to not less than 60°C for
at least one event each day.
If you want to change any of these settings you can do so by
following the instructions on pages 13-15.
First, follow the steps on page 11-12 to set the correct time and date.
Before you start
Open the  ap on the front of your
programmer. Using a non-metallic
object, press the recessed RESET button,
until you hear a click and the display
goes momentarily blank.
This will reinstate the preset programmes
and will set the time to 12:00 on Day 1.
Preset Programmes & Resetting the unit
BOOST
ON
OFF
AUTO
ALLDAY

Related product manuals