13
!
Changing the programmes
Please Note
The unit must be programmed in sequence and ON/OFF
times cannot be programmed out of sequence.
If you want to leave a preset time as it is, simply press
PROG to move on to the next setting.
If at any time you get confused and need to reset the
unit to the preset programmes, press and hold the
recessed RESET button, using a non-metallic object
(see page 11).
Before you change the preset programme
Your installer will have set your unit to operate in either 7-day
mode or 5/2 day mode.
To tell which mode your unit is set press PROG until Event 1 ashes
in the display.
If your display looks like this, your unit is
in 7-day mode and you can programme
di erent settings for each day of the week
(see page 14).
If your display looks like this, your unit is in
5/2 day mode and you can enter one set
of programmes for weekdays and another
set for weekends (see page 15).
To Next Page
Loading...
Need help?
General
