10.2.1.3 Turn off all delegate microphones
mic_all_delegates_off<CR>
Instruct the CU to turn off all delegate microphones.
A Chairman is not turned off.
The CU responds to the command by issuing a ‘mic_off’ command for each microphone which is turned off.
10.2.1.4 Put microphone in request list
mic_request_on <seat no><CR>
Insert microphone into request list.
If the CU inserts the unit into the request list, it replies with a ‘mic_request_on’ command.
10.2.1.5 Remove microphone from request list
mic_request_off <seat no><CR>
Remove microphone from request list.
If the CU removes the unit from the request list, it replies with a ‘mic_request_off’ command.
10.2.1.6 Clear request list
mic_all_requests_off<CR>
Clear the request list.
The CU responds by issuing a ‘mic_request_off’ command for each microphone that is removed from the request
list.
10.2.1.7 Set next microphone on
mic_next_on<CR>
Turns off first microphone in the speak list, and turns on first microphone from the request list.
If a microphone is turned off, the CU sends a ‘mic_off’ command.
If a microphone is turned on, the CU sends a ‘mic_on’ command and a ‘mic_request_off’ command.
10.2.1.8 Set max total speakers
max_total_speakers <max total speakers><CR>
Maximum number of speakers allowed to speak.
<max total speakers> Can be set to “1” to “8”
The CU responds by sending a ‘max_total_speakers’ command.
To Next Page
Loading...