23
1007332 ISSUE 1
a� Screen lock
1) Press for 3 seconds to lock or unlock e
screen. The buttons will turn dark when e controller
is locked
2) Automatic lock period: 30 seconds if no operation.
b� Power on
Press for 3 seconds to unlock screen.
Press to power on heat pump.
c� Temperature setting
Press and to display and adjust e set
temperature.
d� Mode selection
1. Heating/Cooling/Auto
Press to switch between heating,
cooling, and automatic modes.
Mode Symbol Water temperature
setting range
Heating 18-40°C
Cooling 12-30°C
Auto 12-40°C
e� Speed Mode selection
Press to switch between Boost mode and
Whisper mode.
Default mode: Boost.
Please choose Boost mode for initial heating.
f� Wi-Fi
When e screen is on, press for 3 seconds,
aer flashes, enter Wi-Fi connection.
Connect Wi-Fi on mobile phone and input password,
en control equipment by Wi-Fi. When APP connects
Wi-Fi successfully light is on.
g� Defrosting
1. Automatic defrosting: When e heat pump is
defrosting, e lamp flashes; aer defrosting
e lamp stops flashing.
2. Forced defrosting: When e heat pump is heating
and e compressor has been running continuously
for at least 10 minutes, press and
simultaneously for 5 seconds to start forced
defrosting.
The lamp flashes and defrost starts,
when e lamp stops flashing defrosting stops.
The interval between forced defrosts must be more
an 30 minutes.
4�2 OPERATING INSTRUCTIONS
IMPORTANT
Remember at at startup ere is a 1 minute time delay before e heat pump starts
To Next Page
Loading...
