Dantherm HPP-i 8 - 11�0 Warranty Conditions

41
1007332 ISSUE 1
The following exclusions apply to e warranty given
by Danerm DK No claims will be accepted if:
1. The heat pump is installed in any way at is not in
accordance wi e current procedures as defined
by Danerm DK.
2. The heat pump has been worked upon or is
adjusted by anyone oer an a person auorised
to do so by Danerm DK.
3. The heat pump is incorrectly sized for e
application.
4. The water flow rough e machine is outside e
specified limits.
5. The water pH level and/or chemical balance is
outside e following limits:
6. The heat pump has suffered frost damage.
7. The electrical supply is insucient or in any way
incorrect.
8. The fan amps and duct pressure are outside e
specified limits.
9. The air flow to and from e machine is outside e
specified limits.
11�0 WARRANTY CONDITIONS
Acidity pH pH 7.2 - 7.8
Total Alkalinity, as CaCO3 ppm 80 - 120
Total Hardness, as CaCO3 ppm 150 - 250
Total Dissolved Solids ppm 1000
Maximum Salt Content ppm 35000
Free Chlorine Range ppm 1 - 2 Domestic
Free Chlorine Range ppm 3 - 6 Commercial
Superchlorination max 30ppm for 24 hrs
Bromine ppm 2 - 5
Baquacil ppm 25 - 50
Ozone ppm 0.9 Max
Maximum Copper Content ppm 1
Aquamatic Ionic Purifier ppm 2 Max