Selecting Radio Stations
In this menu you can select the saved FM presets.
Press the REPEAT button (E). The display shows:
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select one of
the saved FM presets.
Press the PLAY/PAUSE button (D) to confirm. The device will activate the selected FM preset.
Manual Tuning and Saving Presets
If the sound quality of an FM preset is not good enough, you can tune it manually and save changes.
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to manually tune
the signal, in increments of 0,05 MHz.
Press and hold down the REPEAT button (E) for 2 seconds. The display shows:
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select one of
the 30 preset slots.
Press the PLAY/PAUSE button (D) to confirm. The changes are saved and the display shows:
Viewing Radio Station Information
You can view the information about the currently active radio station.
Repeatedly press the STOP button (C) to toggle different information screens, such as time, date, name of
the radio station, music genre, frequency and signal type.
Note:
The contents of each screen depend on the currently active radio station. Some radio stations do not
display any information.
To Next Page
Loading...
General