DAPAudio MP-100DBT - Remote Control; Installation of the Batteries

26
MP-100DBT
Product code: D1246
Remote Control
The device can be controlled with an IR remote control. The remote control is included in the delivery.
Installation of the Batteries
The supplied remote control is delivered without batteries. It accepts 2 x AAA 1,5 V (alkaline) batteries.
To install the batteries:
Press on the battery compartment cover and move it down to open (Fig. 09).
Insert 2 x AAA 1,5 V batteries into the battery housing (Fig. 10).
Close the battery compartment cover (Fig. 11).
Fig. 09
Fig. 10
Fig. 11
Note:
Make sure that you install the batteries with correct polarity orientation.