DAPAudio MP-100DBT User Manual

22
MP-100DBT
Product code: D1246
Settings Menu
This menu contains all settings and device information.
Press and hold down the STOP button (C) for 2 seconds to enter the menu. The display shows:
The settings menu is visible in the bottom line of the display.
The table below shows the different settings for each function.
Settings
FM Mode
Aux Mode
DAB+ Mode
Bluetooth
Mode
USB Mode
Audio setting
Yes
No
No
No
No
Scan setting
Yes
No
No
No
No
Full Scan
No
No
Yes
No
No
Manual Tune
No
No
Yes
No
No
DRC
No
No
Yes
No
No
Prune
No
No
Yes
No
No
TA
No
No
Yes
No
No
System
Yes
Yes
Yes
Yes
Yes
● Use the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select settings.
● Use the PLAY/PAUSE button (D) to enter submenus and to confirm your choices.
Audio Setting
In this submenu you can adjust the FM audio settings.
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select one of
the 2 options:
● FORCED MONO: The device will use one channel to convert a signal to sound.
● STEREO ALLOWED: The device will use multiple channels to convert multiple signals to sound.
Press the PLAY/PAUSE button (D) to confirm.
Scan Setting
In this submenu you can adjust the FM search settings.
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select one of
the 2 options:
● STRONG STATIONS ONLY: The device searches and saves only the strongest FM radio stations.
● ALL STATIONS: The device searches and saves all available FM radio stations.
Press the PLAY/PAUSE button (D) to confirm.
Full Scan
In this submenu the device automatically searches for DAB+ radio stations.
Press the PLAY/PAUSE button (D) to start auto scan.

DAPAudio MP-100DBT Specifications

General

Brand	DAPAudio
Model	MP-100DBT
Category	Switch
Language	English