System
In this menu you can adjust the system settings. This menu is visible in all functions. You can adjust the
display settings, set language, restore default factory settings or view the firmware version.
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select one of the 4
submenus:
● BACKLIGHT: See 5.3.8.1. Backlight
● LANGUAGE: See 5.3.8.2. Language
● FACTORY RESET: See 5.3.8.3. Factory Reset
● SW VERSION: See 5.3.8.4. Software Version
● Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select
submenus and select options.
● Press the PLAY/PAUSE button (D) to enter submenus and confirm your choices.
Backlight
In this submenu you can adjust the display settings.
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select one of
the 3 submenus:
● TIMEOUT: You can determine after how many seconds of inactivity the backlight of the OLED
display will switch off. Choose ON (display continuously on) or 10/20/30/45/60/90/120/180
seconds.
● ON LEVEL: Display brightness. Choose LOW, MEDIUM or HIGH.
● DIM LEVEL: Letter brightness when the backlight is off. Choose LOW, MEDIUM or HIGH.
Press the PLAY/PAUSE button (D) to enter submenus.
Language
In this menu you can set the menu language.
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select one of
the 9 options:
● ENGLISH
● DEUTSCH (German)
● ITALIANO (Italian)
● FRANÇAIS (French)
● NEDERLANDS (Dutch)
● ESPAÑOL (Spanish)
● NORSK (Norwegian)
● SVENSKA (Swedish)
● PORTUGUÊS (Portuguese)
Press the PLAY/PAUSE button (D) to confirm.
Factory Reset
In this submenu you can restore the default factory settings.
Press the VOLUME +/FORWARD button (B) and the VOLUME –/BACKWARD button (G) to select YES or
NO.
Press the PLAY/PAUSE button (D) to confirm.
Software Version
In this submenu you can view the currently installed software version.
The current software version is: V5.0.04.DAB055.32501.
To Next Page
Loading...
General