Data Translation DT300 Series Getting Started Manual

About this Manual
ix
Related Information
Refer to the following documents for more information on using the
DT300 Series board:
• The DT300 Series User’s Manual (UM-16501). Included on the
Data Acquisition OMNI CD
TM
provided with the DT300 Series
board, this manual describes the features of the DT300 Series
boards and the DT300 Series Device Driver in detail.
• DataAcq SDK User’s Manual (UM-18326). Included on the
Data Acquisition OMNI CD provided with the DT300 Series
board, this manual describes how to develop your own
application program using the Microsoft C compiler and how to
use the DT-Open Layers
DataAcq SDK
TM
to access the capabilities
of Data Translation® data acquisition boards.
• DTx-EZ Getting Started Manual (UM-15428). This manual
describes how to use the ActiveX controls provided in DTx-EZ
TM
to access the capabilities of Data Translation data acquisition
boards in Microsoft Visual Basic® or Visual C++®.
• DT VPI User’s Manual (UM-16150). This manual describes how to
use DT VPI
TM
and the Agilent® VEE™ visual programming
language to access the capabilities of Data Translation data
acquisition boards.
• DT-LV Link Getting Started Manual (UM-15790). This manual
describes how to use DT-LV Link
TM
with the LabVIEW®
graphical programming language to access the capabilities of
Data Translation data acquisition boards.

Data Translation DT300 Series Specifications

General

Brand	Data Translation
Model	DT300 Series
Category	PCI Card
Language	English