DataLocker DL3 User Guide
Follow the instructions in fdisk to create a new partition. Finally you’ll use the mkfs command to
format the disk for Linux. Here, we use ext4.
# mkfs.ext4 /dev/sdb1
If you want to rename the drive, use the e2label command.
# e2label /dev/sdb1 /DataLocker
Frequently Asked Questions
If you still have questions after reviewing the user guide, please consult our FAQ page at dat-
alocker.com.
You can find warranty information at datalocker.com/warranty.
Contact The Support Team
If you have any unresolved issues with your DL3, you can give us a call at (913) 310-9088.
If you would like to contact us outside of our business hours (Monday through Friday from 9:00AM -
5:00PM CST), visit our Support page to post your question and we will get back to you as soon as
possible.
© 2018 DataLocker Inc. All rights reserved. 29
To Next Page
Loading...
