DataLocker DL4 FE - User Menu; Accessing the Onboard Administrator or User Menu

DL4 FE Encrypted External Hard Drive - v1.49/6.5.0 - User Guide
Menu Option Details
Auto-lock Time Modify length of time before your device automatically
locks.
Touch sounds Enable or disable touch sounds.
Brightness Change the level of brightness for your device’s touch
screen.
Read-Only Mode Enable or disable forced read-only mode.
Only available to administrator.
Language Set preferred Language for the profile.
Touch Calibration Calibrate the touch screen interface.
User Menu
NOTE: This menu is only accessible after creating a user in the administrator menu. The User profile
is not available if SafeConsole is enabled for the device.
Menu Option Details
Previous Menu/
Back Button
Tap to go back to the previous menu screen
and save the current settings.
Change Password Change current user password.
Auto-lock Time Modify length of time before your device automatically
locks.
Touch sounds Enable or disable touch sounds.
Brightness Change the level of brightness for your device’s touch
screen.
Language Set preferred Language for the profile.
Accessing the Onboard Administrator or User Menu
For detailed menu information, see Using the Administrator Menu OR Using the User Menu.
NOTE: If your drive was connected to your computer, disconnect your DL4 (See Disconnecting Your
DL4), unplug and reinsert the USB cable to your computer.
1. Connect the DL4 to your computer with the included USB Cable.
OPTIONAL: If the USER profile is enabled, you will need to tap ADMIN OR USER when your DL4
loads.
© 2021 DataLocker Inc. All rights reserved. 17