Programming
Quick Reference Guide 15
Programming
The scanner is factory-configured with a set of standard default
features. After scanning the interface bar code from the Inter-
faces section, select other options and customize your scanner
through use of the programming bar codes available in the Prod-
uct Reference Guide (PRG) for your model. Check the correspond-
ing features section for your interface, and also the Data Editing
and Symbologies chapters of the PRG.
Restore Defaults
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your scanner,
or you’ve changed some options and want the factory settings
restored, scan the Factory Default Settings bar code below. This
will copy the factory configuration for the currently active inter-
face to the current configuration.
Factory Default Settings
To change the settings refer to the PRG.
To Next Page
Loading...
