Datalogic CBX800 - User Manual

CBX800
INSTALLATION MANUAL
Figure A
Indicator LEDs
1
Cover Screws (4)
2
Compression Connectors (5)
4
25-pin Device Connector
5
Host Interface Module Panel
3
NOTE
For a complete Gateway configuration using the Genius™ configuration program, refer to the
CBX800 Help On-Line available on the CD. This manual is also downloadable from the Web
at www.automation.datalogic.com.
821001551 (Rev. A)
5
1
2
4
3

Datalogic CBX800 Specifications

General

Product color	Black, Blue, Grey
LED indicators	Yes
Housing material	-
Protection features	Shock resistant, Vibration proof
International Protection (IP) code	IP65
Input voltage	10/30 V
Power source type	DC
Power consumption (typical)	2.5 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Type	Barcode module bar barcode readers
Scanner type	1D/2D
Connectivity technology	Wired
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	137 mm
Width	128 mm
Height	62 mm
Weight	360 g

Summary

Updates and Language Availability

Services and Support

Legal Notices

Description

Package Contents

Accessories

Supported Reading Devices

Opening the CBX800

Access to Internal Parts

Mechanical Installation

Power Supply

System Wiring

Pinout

Jumper Settings

Power Source Jumper Settings

Configures the power source for the CBX800 via jumpers.

Source Shield Jumper Settings

Sets the reading device shield connection method (earth or filter).

Source Chassis Grounding Jumper Settings

ID-NET;Host Shield Jumper Settings

Network Bus Termination

RS485 HD

Network Parameter Selectors

Network Type Selection

Network Address Selection

Baudrate Selection

Electrical Connections

Host Interface

Host RS232 Interface

Host RS485 Full-Duplex Interface

Host RS485 Half-Duplex Interface

ID-NET Interface

Auxiliary Interface

Data Source Interface

Data Source RS232 Interface

Data Source RS485 Full-Duplex Interface

Data Source Auxiliary Interface

Inputs

External Trigger Input (Input 1)

External Trigger Input Connections Using External Power

Generic Input (Input 2)

Input 2 Connections Using CBX800 Power

Outputs

Output Connections Using CBX800 Power

Output Connections Using External Power

Other I;O

Indicator LEDs

Typical Layouts

Fieldbus Gateway

Ethernet TCP;IP Gateway

ID-NET Gateway

MUX32 Gateway

Technical Features

Compliance

Power Supply

CE Compliance

FCC Compliance

Declaration of Conformity