Datalogic CBX800 - Accessories; Supported Reading Devices

CBX800 INSTALLATION MANUAL
5
ACCESSORIES
The following accessories are available on request for the CBX800:
Name Description Part Number
BM200/210 Ethernet TCP/IP Module STD/IP65 93ACC1851, 93ACC1852
BM300/310 Profibus Module STD/IP65 93ACC1810, 93ACC1811
BM400 DeviceNet Module IP65 93ACC1814
BM500/510/520 Ethernet/IP Module STD/IP65/IP54
93ACC1812, 93ACC1813,
93ACC1840
BM600 CANopen Module STD 93ACC1815
BM700/710 Profinet Module STD/IP65 93ACC1816, 93ACC1886
BM1100 CC-Link Module STD 93ACC1845
BM1200/1210 Modbus TCP STD/IP65 93ACC1848, 93ACC1849
BA100 DIN Rail Adapters 93ACC1821
BA200 Bosch Adapters 93ACC1822
BA300 M12 3P F Connector Panel (Service) 93ACC1877
BA400 M12 3P M Connector Panel (External Power) 93ACC1853
BA500 M12 4P F Connector Panel (Trigger) 93ACC1854
BA600 M12 5P F Connector Panel (ID-NET™ Out) 93ACC1855
BA700 M12 5P M Connector Panel (ID-NET™ In) 93ACC1856
BA900 Two Cable Glands Panel 93ACC1847
ADP-FF1 Gender Changer 25P F/F (5 pcs) 93ACC1827
SUPPORTED READING DEVICES
The CBX800 can be directly connected to all of the following readers through the 25-pin connector illustrated in
Figure A.
Linear Scanners 2D Readers
DS6300 DS6400 DX6400 MATRIX-2000™
DS8100A DX8200A
NOTE
CBX800 is backward compatible with DS2100N/DS2400N (black body), DS4600A, and
DS1100/DS2200 10-30 Vdc model reading devices using the ADP-MM1 25-pin gender
changer. See the Gender Changer documentation for the relative CBX pinout.
NOTE
For 6/8K family scanners having software version 6.80 or later, an alternative fixed speed
(57600 baud) ID-NET™ layout can be made without the use of CBX800. See the ID-NET™
Application Note on CD-ROM for details.
For maximum ID-NET™ network performance use CBX800.
A Hand-Held reader can also be connected to the 25-pin connector and have its data passed through to the Host or
ID-NET network.