Standard 2 of 5 (Std 2 of 5) Enable
Product Reference Guide 335
Standard 2 of 5 Correlation
This feature enables/disables character correlation for Standard 2 of 5.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
STANDARD 2 of 5 CORRELATION = DISABLE
STANDARD 2 of 5 CORRELATION = ENABLE
To Next Page
Loading...
