370 Magellan
®
2200VS/2200VS and 2300HS/2300HS
MSI/Plessey Length 1
Length 1 is the minimum label length if in variable length mode, or the
first fixed length if in fixed length mode (see
MSI/Plessey Length Con-
trol)
. Length includes the barcode’s check and data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
SET MSI/PLESSEY LENGTH 1 below. You’ll
need to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C that rep-
resent the desired label length. The selectable range for this option is
04 to 16. Pad all single digit numbers with a leading zero to yield a
two-digit entry (04-16).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET MSI/PLESSEY LENGTH 1
To Next Page
Loading...
