Datalogic Magellan 3300HSi

8 Magellan
TM
3300HSi
Diagnostics
Varies (see Error
Codes on page 9
for more informa-
tion)
The LED can provide diagnostic feed-
back if the scanner discovers a prob-
lem during SelfTest.
Prog. Mode
See Host Disable
above.
The scanner is in Programming Mode.
Table 3. Beeper Functions
BEEPER
INDICATION
INDICATION COMMENT
Power On Beep Single beep
The Power-On LED indication is a config-
urable feature which can be enabled or
disabled. When enabled, this beep indi-
cates the scanner has finished all its
power up tests and is now ready for oper-
ation.
Good Read
Indication
Single beep
The good read beep indication is configu-
rable. Options include: Enable/disable,
frequency, duration and volume. See the
Product Reference Guide (PRG) for more
information.
Diagnostics
Varies (see Error
Codes on page 9
for more informa-
tion)
The Beeper can provide diagnostic feed-
back if the scanner discovers a problem
during SelfTest.
Programming
Mode
Indications
Varies depending
upon the fea-
ture(s) being con-
figured.
The Beeper will sound as programming
barcode labels are scanned, indicating
progress during scanner configuration.
Table 2. Green LED Indications
LED
INDICATION
INDICATION COMMENT