HOST CONFIGURATION STRINGS
NOT FOR PEN EMULATION INTERFACES
Code Length Tx not transmitted
transmitted in variable-digit format
transmitted in fixed 4-digit format
Field Adjustment Character
disable character replacement
first character replacement
second character replacement
third character replacement
disable reader address stamping
enable reader address stamping
disable cradle address stamping
enable cradle address stamping
disable reader address delimiter
enable reader address delimiter and select
character
disable cradle address delimiter
enable cradle address delimiter and select
character
hour/minutes/seconds/month/day/year
hour/minutes/seconds/day/month/year
disable time stamping delimiter
enable time stamping delimiter
select time stamping delimiter character
a = ASCII character.
d = a number from the Hex/Numeric Table
e, f, g, h = HEX values representing an ASCII character
a = ASCII character of the DATALOGIC STANDARD Code Identifier from the table on page 70.
d = a number in the range 01-32 from the Hex/Numeric Table
e = Hex value from 00 to FE
f = Hex value of the character to be replaced from 00 to FE
g = Hex value of the new character to insert from 00 to FE
FF = replace with no new character (remove character)
h = a HEX value in the range from 00 - FE representing the ASCII character.
To Next Page
Loading...
Need help?
General
