Datalogic PowerScan D8330

CONFIGURATION
27
4.5 POWERSCAN
®
M8300/BC-80X0 STAND-ALONE SETUP
Read the restore default parameters code below.
1.
Restore PowerScan
®
M8300 Default
Ì$+$*oÎ
Follow the procedure below to set the radio address and bind PowerScan
®
M8300 to the BC-80X0 cradle.
2.
Enter Configuration
Ì$+;Î
3.
Set Date
ÌIA%Î
+
six digits for Day, Month and Year (DDMMYY)
4.
Set Time
ÌIB'Î
+
four digits for Hour and Minutes (HHMM)