POWERSCAN
®
D8330/M8300/M8300-DK
DISPLAY PARAMETERS 16-Keys (Continued)
Transmit code with dafault QTY
Discard barcode, generate error beep
RepeatTimeout
QTY/CODE separator no terminator
one character
two characters
three characters
four characters
Overwrite CODE and transmit
Append to CODE and transmit
Append to code, don’t transmit
ddmmyy = numbers from the Hex/Numeric Table representing day, month, year
hhmm = numbers from the Hex/Numeric Table representing hour, minutes
a = a number from the Hex/Numeric Table
b = HEX values representing an ASCII character
c = a number from the Hex/Numeric Table in range [1..5] representing the
Function Key identifier
x = a number from the Hex/Numeric Table in range [0..A] representing the
CMD_ID identifier
t = a number in the range 00-99 (sec.) from the Hex/Numeric Table
00 = Timeout disabled (always on).
b = 3 Hex values from 00 to FE representing the left, centre and right keys.
FF = KeyID disabled.
To Next Page
Loading...
Need help?
General
