Exit and Save Configuration
HEADER
no header
one character header
two character header
three character header
four character header
five character header
six character header
seven character header
eight character header
After selecting one of the desired Header codes, read the character(s) from the HEX table.
Valid characters are in the range 00-FE. For Wedge and USB-KBD interfaces, it is also possible
to read the Special Key(s) on page 74.
Example
:
+ 41 + 42 + 43 + 44 = Header ABCD
For more details see par. 5.4.1 and par. 5.4.2.
To Next Page
Loading...
Need help?
General
