64 PowerScan
®
RF Scanner
Drop Links on
Reset Option
When enabled, this option causes the Base Station to drop its links to
any and all scanners whenever power is reset/cycled. This provides a
simple way to ensure that when reconfiguring a system, scanners do
not need to be located and individually unlinked.
Feature is specific to Base Station ONLY
NOTE
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 33.
SET -------------------------------------------
Drop all links on reset
(ENABLE)
Do not drop all links on reset
(DISABLE)
END ------------------------------------------
To Next Page
Loading...
