70 PowerScan
®
RF Scanner
Source-Radio
Identification
(ID)
This feature allows you to include source-radio identification
1
(repre-
sented by six ASCII bytes) along with bar code data transmitted to the
host. Enable this feature to identify the individual scanner sending a
given data transmission. Options for this feature are:
• Do not include source-radio ID
• Include source-radio ID as prefix
• Include source-radio ID as suffix
Feature is specific to Base Station ONLY
NOTE
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 33.
1. Each scanner has been pre-configured at the factory with its own unique six-character identifica-
tion (source-radio ID).
CAUTION
When included as a prefix or suffix, the source-
radio ID is displayed immediately adjacent to the
bar code data. If an additional prefix or suffix is
included (e.g., other global prefix or suffixes are
included), any source-radio ID prefix or suffix
remains adjacent to (and is considered part of) the
bar code data.
To Next Page
Loading...
