Datalogic QuickScan 2500 Series User Manual

30 QUICKSCAN™ 2500
CONFIGURATION | RS-232 INTERFACE
Not available for QW2500 and QD2520
Use the programming bar codes in this chapter if modifications to the standard RS-232
interface settings are necessary to meet your system’s requirements. Additional settings
which apply to both the RS-232 and USB interfaces are available in
RS-232/USB-COM
Settings, starting on page 36
.
Standard Factory Settings
Reference Appendix B, for a listing of standard factory settings.
SECTION CONTENTS
RS-232 S
TANDARD SETTINGS starting on page 31
• Baud Rate
• Data Bits
• Stop Bits
• Parity
• Handshaking Control

Datalogic QuickScan 2500 Series Specifications

General

Brand	Datalogic
Model	QuickScan 2500 Series
Category	Barcode Reader
Language	English