144 M-Class
Download the generated files to the printer – one method is the DOS copy command:
copy small.ls lpt1: /b
Reset the printer by pressing and holding the CANCEL Key for approximately four seconds.
Verify the operation by printing a Configuration Label (see Section 5.3.2) The new font selection will be printed on
the label under SYSTEM INFORMATION / OPTIONAL LANGUAGES or select the new language in the SYSTEM
SETTINGS / MENU LANGUAGE in the printer’s menu.
This is the only method to determine whether the download was successful. If the menu system displays the new
language selection, but all displayed messages remain in English an error has occurred. Re-check the process. Contact
Datamax Technical Support if problems continue (be prepared to provide the Gemmsglst.xls and the DPL download
file that you have created). Other possible error messages are as follows:
Menu Language Error Message Description
Please select the entire column(s) or the
desired language(s), by clicking on the
column letter(s)
After pressing the Generate DPL File(s)
radio button, the languages to convert were
not correctly selected.
Message text may not exceed MAX = xx
designated characters for this MID
The entered message exceeds the number of
characters specified in column C. You may
not modify this number.
To Next Page
Loading...
Need help?
General
