M-Class 5
2.0 Before Using the Printer
Removing the Packaging
Inspect the shipping container(s) for damage. If damage is evident, immediately notify the shipping company to report the
nature and extent of the damage.
The printer is carefully packaged to avoid any damage during transit. In order to operate the printer, you will need to
remove the packaging materials (for example, the tape and foam) that were placed in the printer for shipment. Complete
the following steps prior to connecting power or attempting to load media.
Ensure that the arrow on the box is pointing up, and then open the box.
Remove the top piece of packing foam.
Lift the printer from the box.
Remove the printer from the plastic bag.
Remove any tape or additional packing foam from the inside of the printer.
Note: It is a good idea to save all packaging materials in the event that shipping the printer is ever required.
To Next Page
Loading...
Need help?
General
