Datamax Mark II M-4206 User Manual

36 M-Class
The second label printed is the Test Label. This label is used to test the condition of the printhead, as shown below:
Good Print Quality Label:
Even pattern consistency
indicates correct printhead
operation.
Faulty Print Quality Label:
Streaks indicate a dirty or
faulty printhead. See Section
6.1 for cleaning instructions.

Datamax Mark II M-4206 Specifications

General

Print Resolution	203 dpi
Type	Label Printer
Print Method	Thermal Transfer
Max Print Speed	6 inches per second
Memory	16 MB SDRAM, 8 MB Flash
Interfaces	USB, Serial, Parallel
Media Width	4.5 inches
Media Length	0.25" to 99"
Max Print Width	4.25 inches (108 mm)