M-Class 51
System Settings (continued)
SET FACTORY DEFAULTS
Parameters in this menu listing with the ‘’ symbol are the designated defaults.
SET FACTORY DEFAULTS
Overwrite the current settings with the factory default settings or, if selected, will
restore the Factory Setting File.
Note: The reset will be automatic. If no Factory Setting File is used, all menu settings
will be restored except CUSTOM ADJUSTMENTS, and the media and ribbon sensor
calibrations.
FORMAT ATTRIBUTES
Affects the manner in which overlapping text and graphics are treated as the label
is printed. Consult the Class Series Programmer’s Manual for details.
XOR
Intersecting text strings, images, and bar codes print on top of one another.
OPAQUE
Interacting text strings, images, and bar codes are obliterated by those formatted
last. Each character cell is treated as opaque.
TRANSPARENT
Intersecting text strings, images, and bar codes will not be printed. (An odd
number of overlapping objects will print.)
LABEL ROTATION
Instructs the printer to rotate the label format 180 degrees before printing.
ENABLED
Label formats are flipped top to bottom.
DISABLED
Label formats are printed normally.
IMAGING MODE
Instructs the printer whether to pre-image the label format.
Note: This selection can affect the accuracy of time-stamped labels and throughput.
MULTIPLE LABEL
The printer images multiple labels as memory permits, achieving the fastest
throughput; however, if time-stamping, the time will reflect the moment the label
is imaged rather than when actually printed.
SINGLE LABEL
The printer images the next label only after the previous label has been
successfully printed. Single processing provides time-stamps that are more
accurate, but it slows label throughput time.
PAUSE MODE
When enabled, suspends printing between each label until the PAUSE Key is
pressed.
ENABLED
Requires an operator press the PAUSE Key after each label.
DISABLED
The printer completes label batch without pausing between labels.
To Next Page
Loading...
Need help?
General
