PTZ TELEPROMPTER KIT TP-900
13
15. Install the Cloth Hood, Item H. The hood is
secured to the inside of the TP-900 metal base
tray with tripod plate, Item F and Glass support
bar, Item U via integral magnets.
The rear of the hood can be expanded if the PTZ
camera or cables protrude past the rear of the TP-
900 frame.
16. Turn on the 15” LCD control unit by connecting the mains power supply, Item V, the power cable can be routed
through the hole in TP-900 metal base tray with tripod plate, Item F. The dvPrompter Plus software will
automatically load, please see the appropriate section of this manual for detailed software usage instructions.
17. If required adjust the position of the 15” LCD control unit.
18. Adjust the camera exposure settings as necessary. See the Camera Exposure section of this manual.
To Next Page
Loading...