Datecs DP-50 - MODE P1 - PROGRAMMING OF ITEMS AND MAIN PARAMETERS

DP-50 / DP-50D / MP55-B - USERS MANUAL
MODE PROGRAMMING P1 - PROGRAMMING OF ITEMS AND MAIN
PARAMETERS
This mode can be accessed from state "OFF" by consecutively pressing the
keys
4
, password, TOTAL,
1
.
The parameters which can be programmed in this mode are summarized in
tables 1 - 8.
TABLE DESCRIPTION
1 ITEM PARAMETERS
2 SHOP ORGANIZATION
3 OPERATORS
4
SETTINGS OF THE KEYS
%-
and
%+
5 PARAMETERS FOR SETTING THE RECEIPTS OUTLOOK
6 TEXTS INTO RECEIPT
7 DATE AND TIME
8 PARAMETERS FOR SETTING THE WORK WITH ADDITIONAL CURRENCY
17