DP-50 / DP-50D / MP55-B - USERS MANUAL
MODE Z – REPORTS WITH CLEARING
1 In order to access the mode Z from the OFF state - press the key '3'.
2 In the left upper side on the display the letter 'Z' appears and on the next row an
invitation for password is shown.
4 Press key:
TOTAL Daily report and clearing
They are reported and cleared:
- the turnovers and the tax debts for each tax group,
- the turnovers divided by sales, surcharges and discharges
- the turnovers divided by payment types
- the turnovers from 'void'/'correction' operations
After the reports are printed the registers involved are
cleared automatically.
When the field 7 of table 2 is set to 1, the turnovers and
quantities of items, departments and item groups are also
cleared.
STL Reporting and clearing the operators debts.
On the display is shown ‘ 1 – 30 ‘. The report can be
executed for all operators ( by pressing TOTAL only) or for
separate operator by entering operators number and after
pressing TOTAL.
In the report are included and after cleared:
- the turnovers by sales, surcharges and discharges
- the turnovers divided by payment types
- the turnovers from 'void'/'correction' operations
PLU Reporting and clearing the turnovers and the quantities of the
items and departments.
The turnovers for the departments and item groups are printed.
The turnovers of the items and item groups are cleared.
This report is available only when the field 2 from table 2 is
set to 0.
G4 Only for DP-50 and МP-55B: Printing and clearing the electronic
journal. After the electronic journal is successfully printed - it is
automatically cleared
30
To Next Page
Loading...