Datecs DP-50 - Table 08: Alternative Currency Operations; MODE P2 - PROGRAMMING OF SPECIFIC PARAMETERS; Table 03: Tax Obligated Person ID (BULSTAT)

DP-50 / DP-50D / MP55-B - USERS MANUAL
Note: After entering a value in a field, it is needed the key "TOTAL" to be pressed.
After the fields are modified, in order the clock-calendar to be actualized, it is needed
the key "PLC" to be pressed, than a confirmation dialog appears. If the new date is
allowable, but differ forward more than 1 day from the current date, a warning
message appears on the display "PLEASE CHECK THE DATE”. In this case, if the
operator is sure, that he really wants to store into the clock the date entered, he must
press the TOTAL key.
Table 08 : Setting up the alternative currency operations, 1 row, 4 fields; ,
Field No Description Range Note
1 Printing the total in the receipt
into alternative currency and
its exchange rate in relation
to the main currency
0 or 1 0:Disabled
1:Enabled
Default: 0
2 Main currency
(Look at table 6 row 6)
0 or 1 0:The main currency is the left one
1:The main currency is the right one
Default: 0
3
Number of the integer digits into
exchange rate
From 0 to 5 Default 1
4
Exchange rate of the alternative
currency
up to 6 digits
Default:195583
MODE P2 - PROGRAMMING OF SPECIFIC PARAMETERS
The specific parameters are stored into fiscal memory.
The fiscal memory programming should be made by the manufacturer or by
authorized service! In order to set the fiscal memory in use after the ECR purchasing
and its installing into a store, it is necessary a qualified specialist from authorized
service to be called. This specialist must represent an authorized service, which has
a service contract with DATECS and which has a service contract with the trade
organization.
Table 03:Identification number of the tax obligated person (BULSTAT),
1 row,1 field;
Field No Description Range Note
1 Identification number of the
tax obligated person
(BULSTAT)
13 symbols Default:
"NOT PRESENTED"
When starting to program this field, the cursor is stored on the left side.After
each symbol entered, the cursor will moving on the right. The unused symbols should
contain 'space'. When this field is printed, the spaces, included into the field are
ignored.
Example:
The value entered: 123_4567890__
will be printed in the receipt as the follows: 1234567890
22